Custom Metalwork for Interior Designers

Finish samples in hand, honest lead times, and metalwork that matches the drawing you presented to your client.

Finishes and Samples

You are presenting to a client. You should have the metal in your hand, not a photograph of it.

We provide physical samples on the actual material — powder coat sprayed on the steel section your piece will use, stainless brushed in the direction the grain will run, brass at the stage of patina you are specifying, blackened steel finished the way it will arrive. Samples are yours to keep and to leave with the client.

The finishes we are asked for most: matte and satin black powder coat, bronze and champagne tones, blackened and waxed steel, brushed and bead-blast stainless, and unlacquered brass left to age. For anything unusual, send us the reference image and we will match it or tell you honestly that we cannot. The same matte white and matte black powder coats are what we use on our steel display pedestals.

One caution worth repeating to clients: metal finishes read differently at scale and under the actual lighting. A 50mm chip is a decision made twice. For feature work, ask us for a larger sample.

Lead Times

We will give you a real date, and we would rather lose a job than give you a date we cannot hold.

Lead time depends on the piece, the finish and where the shop is booked, so it is set at quoting rather than published as a promise. What we can tell you now is what tends to stretch it: multi-stage finishes, anything requiring galvanising before coating, brass work with hand patination, and glass — which is ordered to the frame after the frame is built, not alongside it.

If you are working to an install date or a photography date, tell us at the start. We schedule backwards from it, and we will tell you at the consultation if it does not work.

Custom Furniture and Feature Work

The pieces designers come to us for are usually the ones nobody stocks.

• Dining and console tables — steel bases, live-edge and slab tops, custom dimensions
• Shelving, brackets and library systems, wall-hung and floor-standing
• Fireplace surrounds, hearth trim and firewood storage
• Interior stair guards, handrails and balustrade infill
• Bed frames, benches, plinths and vanity bases
• Screens, room dividers and steel-framed internal doors
• Feature lighting frames and mounting structures

Where a piece pairs metal with timber, stone or glass, we fabricate the metal and coordinate the rest so you are not managing three trades to get one object.

Two catalogues sit alongside the one-off work: table legs and bases for a top you already have, and wine wall systems for wall-mounted and floor-to-ceiling bottle displays.

Hidden Steel for Millwork

A lot of what designers ask us for is steel nobody will see: the frame that lets a vanity float, the bracket that stops a long shelf sagging, the support under a stone top that cabinets alone can’t carry. We work as the steel partner for designers and millworkers — to your drawings and on your schedule — and install before drywall, tile or stone closes it in.

• Floating vanity and floating desk frames fixed to studs or blocking.
• Long and heavy shelves on concealed steel brackets or angles.
• Cantilevered benches and window seats.
• Stone and quartz supports for islands, overhangs and floating counters.
• Steel frames inside or behind cabinetry to carry loads the boxes can’t.
• Custom furniture supports and bases hidden under upholstery or timber.

See support frames for stone countertops, custom brackets and wood and metal fabrication. For metal that shows in the joinery, such as mesh door inserts, trims, grilles and access panels, see metal components for millwork and cabinetry. Frames for bathroom and hallway mirrors and mirror cabinets are on custom metal mirror frames.

Working to Your Drawings

Send whatever you have. A dimensioned drawing is ideal, a sketch with intent is workable, and a reference photograph with the dimensions you need is enough to start.

We will come back with a shop drawing showing what we propose to build, including the details that were not in your drawing because they are ours to solve — how it fixes, how it takes load, how the joints resolve. You approve that, and the price is fixed against it.

Where your design and the physics disagree, you will hear it at drawing stage with a proposed alternative, not after your client has approved a rendering. That is the part of this we take most seriously: the piece that arrives should look like the one you presented.

Screens and Dividers

For screening and spatial division rather than furniture, privacy and architectural screens covers pattern, material and fixing options.

For interior divisions specifically, our custom metal partitions and steel-framed glass dividers page covers the design catalogue, glass options and how we work to an existing opening.

For pattern-driven room dividers and feature panels — sixty laser-cut patterns, each sized to the opening — see our decorative screen collection.

For the technical side of specifying glazed metalwork, including frame profiles and who supplies and warrants the glass, see glass and metal.

Free in-house consultation

We come to you, measure the site, and talk through options and budget before you commit to anything. No charge, no obligation.

Call (778) 805-5333 or email sales@trussmetal.com